B-52B/DTV (Drop Test Vehicle) flight test results: Drop test missions

The NASA test airplane, B-52B-008, was a carrier for drop tests of the shuttle booster recovery parachute system. The purpose of the test support by Boeing was to monitor the vertical loads on the pylon hooks. The hooks hold the Drop Test Vehicle to the B-52 pylon during drop test missions. The loads were monitored to assure the successful completion of the flight and the safety of the crew

A study of model deflection measurement techniques applicable within the national transonic facility

Moire contouring, scanning interferometry, and holographic contouring were examined to determine their practicality and potential to meet performance requirements for a model deflection sensor. The system envisioned is to be nonintrusive, and is to be capable of mapping or contouring the surface of a 1-meter by 1-meter model with a resolution of 50 to 100 points. The available literature was surveyed, and computations and analyses were performed to establish specific performance requirements, as well as the capabilities and limitations of such a sensor within the geometry of the NTF section test section. Of the three systems examined, holographic contouring offers the most promise. Unlike Moire, it is not hampered by limited contour spacing and extraneous fringes. Its transverse resolution can far exceed the limited point sampling resolution of scanning heterodyne interferometry. The availability of the ruby laser as a high power, pulsed, multiple wavelength source makes such a system feasible within the NTF

Doubles and Negatives are Positive (in Self-Assembly)

In the abstract Tile Assembly Model (aTAM), the phenomenon of cooperation occurs when the attachment of a new tile to a growing assembly requires it to bind to more than one tile already in the assembly. Often referred to as ``temperature-2'' systems, those which employ cooperation are known to be quite powerful (i.e. they are computationally universal and can build an enormous variety of shapes and structures). Conversely, aTAM systems which do not enforce cooperative behavior, a.k.a. ``temperature-1'' systems, are conjectured to be relatively very weak, likely to be unable to perform complex computations or algorithmically direct the process of self-assembly. Nonetheless, a variety of models based on slight modifications to the aTAM have been developed in which temperature-1 systems are in fact capable of Turing universal computation through a restricted notion of cooperation. Despite that power, though, several of those models have previously been proven to be unable to perform or simulate the stronger form of cooperation exhibited by temperature-2 aTAM systems. In this paper, we first prove that another model in which temperature-1 systems are computationally universal, namely the restricted glue TAM (rgTAM) in which tiles are allowed to have edges which exhibit repulsive forces, is also unable to simulate the strongly cooperative behavior of the temperature-2 aTAM. We then show that by combining the properties of two such models, the Dupled Tile Assembly Model (DTAM) and the rgTAM into the DrgTAM, we derive a model which is actually more powerful at temperature-1 than the aTAM at temperature-2. Specifically, the DrgTAM, at temperature-1, can simulate any aTAM system of any temperature, and it also contains systems which cannot be simulated by any system in the aTAM

Selective Attention and Audiovisual Integration: Is Attending to Both Modalities a Prerequisite for Early Integration?

Interactions between multisensory integration and attention were studied using a combined audiovisual streaming design and a rapid serial visual presentation paradigm. Event-related potentials (ERPs) following audiovisual objects (AV) were compared with the sum of the ERPs following auditory (A) and visual objects (V). Integration processes were expressed as the difference between these AV and (A + V) responses and were studied while attention was directed to one or both modalities or directed elsewhere. Results show that multisensory integration effects depend on the multisensory objects being fully attended—that is, when both the visual and auditory senses were attended. In this condition, a superadditive audiovisual integration effect was observed on the P50 component. When unattended, this effect was reversed; the P50 components of multisensory ERPs were smaller than the unisensory sum. Additionally, we found an enhanced late frontal negativity when subjects attended the visual component of a multisensory object. This effect, bearing a strong resemblance to the auditory processing negativity, appeared to reflect late attention-related processing that had spread to encompass the auditory component of the multisensory object. In conclusion, our results shed new light on how the brain processes multisensory auditory and visual information, including how attention modulates multisensory integration processes

Investigation of Twin Jet Aeroacoustic Properties in the Presence of a Hybrid Wing Body Shield

In preparation for upcoming wind tunnel acoustic experiments of a Hybrid Wing Body (HWB) vehicle with two jet engine simulator units, a series of twin jet aeroacoustic investigations were conducted leading to increased understanding and risk mitigation. A previously existing twin jet nozzle system and a fabricated HWB aft deck fuselage are combined for a 1.9% model scale study of jet nozzle spacing and jet cant angle effects, elevon deflection into the jet plume, and acoustic shielding by the fuselage body. Linear and phased array microphone measurements are made, and data processing includes the use of DAMAS (Deconvolution Approach for the Mapping of Acoustic Sources). Closely-spaced twin jets with a 5 inward cant angle exhibit reduced noise levels compared to their parallel flow counterparts at similar and larger nozzle spacings. A 40 elevon deflection into the twin jet plume, which is required for HWB ground rotation, can significantly increase upstream noise levels (more than 5 dB OASPL) with only minimal increases in the downstream direction. Lastly, DAMAS processing can successfully measure the noise source distribution of multiple shielded jet sources

Sharing Resources: Opportunities for Smaller Primary Care Practices to Increase Their Capacity for Patient Care

Outlines findings linking shared resources with use of health information technology, care coordination, self-management, and quality monitoring, and strategies to increase resources among small and midsize practices by expanding shared resource models

Astrochemical confirmation of the rapid evolution of massive YSOs and explanation for the inferred ages of hot cores

Aims. To understand the roles of infall and protostellar evolution on the envelopes of massive young stellar objects (YSOs). Methods. The chemical evolution of gas and dust is traced, including infall and realistic source evolution. The temperatures are determined self-consistently. Both ad/desorption of ices using recent laboratory temperature-programmed-desorption measurements are included. Results. The observed water abundance jump near 100 K is reproduced by an evaporation front which moves outward as the luminosity increases. Ion-molecule reactions produce water below 100 K. The age of the source is constrained to t \~ 8 +/- 4 x 10^4 yrs since YSO formation. It is shown that the chemical age-dating of hot cores at ~ few x 10^3 - 10^4 yr and the disappearance of hot cores on a timescale of ~ 10^5 yr is a natural consequence of infall in a dynamic envelope and protostellar evolution. Dynamical structures of ~ 350AU such as disks should contain most of the complex second generation species. The assumed order of desorption kinetics does not affect these results.Comment: Accepted by A&A Letters; 4 pages, 5 figure